Hi, no there isn't any videos on this. You would need to remove the top half of the boat by unscrewing the 13 screws around the outside of the boat, then the 2 screws underneath, either side of the rudder.
Once unscrewed the top half will pull off. Be careful as there are wires connecting the top to the bottom half of the hull.
You should then be able to see the pin connected to the servo. You will then be able to either straighten it out or replace it.
Please call us on 01865 848000 if you need anymore help with this.
Hi, no there isn't any videos on this. You would need to remove the top half of the boat by unscrewing the 13 screws around the outside of the boat, then the 2 screws underneath, either side of the rudder.
Once unscrewed the top half will pull off. Be careful as there are wires connecting the top to the bottom half of the hull.
You should then be able to see the pin connected to the servo. You will then be able to either straighten it out or replace it.
Please call us on 01865 848000 if you need anymore help with this.
Thanks, Tom.